TranslationsDiscussioneVisualizza wikitestoCronologia Translations:Costruzione del bastone di guida/8/en

Draw on the first strip (the one that measures 10 * 95 * 1000 mm) the blade according to these measures:

• 
• 
• 

The measurements shown are sufficiently indicative, this means that you could vary these measurements by a maximum of 5mm. The internal angle between the headstock and the shaft is 135 °.

The dotted part in the first 2 photos on the right indicates the point where the second strip will be positioned, which will act as a guide rod rod. More precisely, the part delimited by the hatch will be leveled in order to create a "step" a little less than half the height of the strip itself. This procedure will also be applied to the second batten.