TranslationsDiscussioneVisualizza wikitestoCronologia Translations:Costruzione del bastone di guida/14/en

Once the blade and rod have been obtained, these will be fixed together, for this purpose you will have to use 2 screws not too long (1 cm max, or nails) which will be screwed one on the second strip and one on the first. The strips must obviously be superimposed. If the screws are too long, you can still level them with a metal file. To fix the screws, all you have to do is screw them in the points you have chosen, the first screw will start from the blade and penetrate into the second strip, the second will start from the second strip and enter the blade.